Skip to product information
1 of 4

MOTIUM

MOTIUM OEM QUALITY Premium All-Season Windshield Wiper Blades (22"+22" pair for front windshield)

MOTIUM OEM QUALITY Premium All-Season Windshield Wiper Blades (22"+22" pair for front windshield)

Regular price $16.99 USD
Regular price Sale price $16.99 USD
Sale Sold out
Quantity

Streaks, chatter and smeared glare across the glass are usually a sign that a wiper blade has stopped making even contact with the windshield. This MOTIUM pair addresses that with a natural rubber wiping edge supported by an alloy steel and plastic frame, sized at 22 inches for both the driver and passenger side of the front windshield. The blades use a hook mounting style, which is the most common arm fitting on passenger cars, and MOTIUM lists them under part number WLJH2222OEM as a replacement for several established beam and conventional blade lines including Bosch ICON Beam, Michelin Stealth, Rain-X Expert Fit, Rain-X Latitude and Rain-X Quantum. Each pair weighs 14 ounces.

  • Set contents: two 22 inch blades for the front windshield only. No rear blade is included, and no adapters for non-hook arms are listed.

Confirm that both front arms on the vehicle use a hook connector and take a 22 inch blade before ordering.

Installing the blades follows the same basic process on most vehicles: lift the arm away from the glass, press the release tab at the center pivot, slide the old blade off the hook, and click the new blade into place until it locks. It is worth doing one arm at a time so the arm does not snap back and crack the windshield while no blade is attached. After installation, run the wipers through a full cycle with the washer fluid to confirm the edge seats evenly across the glass and that neither blade lifts at highway speed.

For storage, keep any unused blade in a cool, dry location away from direct sunlight, since prolonged UV exposure degrades natural rubber before the blade ever touches glass. When comparing blades of this type against alternatives, the main practical distinction is frame construction: alloy steel and plastic frames perform well across a wide temperature range but can collect ice and snow in the joints during winter, whereas beam-style blades avoid that issue at a higher price point. This pair suits drivers who want a reliable OEM-style replacement at a straightforward fit for hook-style arms and who service both front blades together on the same interval.

View full details